Tryckreducerande regulator 1000HP-1+6

Models 1000HP-1+6 or 1000HP-1+8 are differential reducing regulators used to maintain a relatively constant pressure differential between the fluid loading pressure – P Load, and the valve’s outlet pressure – P2, with P2 pressure higher than P Load pressure. Model 1000HP-1+6 is a single-diaphragm differential construction.

Model 1000HP-1+8 is a double-diaphragm differential construction. A double-diaphragm design prevents the fluid passing through the body from mixing into the loading fluid pressurizing the spring chamber in the event of a diaphragm failure. The design takes advantage of all the features of the basic 1000HP reducing regulator; see Technical Bulletin 1000HP-BASIC-TB. The availability of optional construction and body and trim materials is limited to those indicated in this Technical Bulletin.



Teknisk spec

  • 1/2"-2.0"
  • Ductile iron,cast bronze,cast carbon steel,cast stainless steel
  • 740 PSIG
  • Female NPT,tapered thread female,flanged,extended-nipples
Dokument Ingress Filtyp Storlek
Data sheet Cashco 1000HP English
7,41 MB Ladda hem
IOM Cashco 1000HP English
4,77 MB Ladda hem
IOM Cashco Svenska 1000 HP Svenska
1,77 MB Ladda hem

Få ett kostnadsförslag

Vi skicka gärna ett kostnadsförslag på denna produkt åt dig. Fyll i formuläret så återkommer vi till dig så snart som möjligt.